If you specify that you are using heavy cardstock in most modern printers the machine heats up the fuser more. P9565, RM6-9559-555, support and Supplies Techozoic 7, if you could not find the exact driver for your hardware device or you aren t sure which driver is right one, p9565 Fuser Removal procedure 7568 Printer Repair Parts! This website is not affiliated with Ricoh.
One thing you don t want to do is turn it off then back on right away?
Also make sure the machine is not in an extremely hot environment.
To avoid this problem break the large print job into smaller jobs with time to cool down in between jobs.
Sometimes the fuser can t stay at the correct temperature and it keeps rising under these circumstances.
This page contains the list of download links for Ricoh Printers.
To download the proper driver you should find the your device name and click the download link.
Since the error is related to a high temperature reading turn the machine off and let it sit 75 to 85 minutes.
The good thing about this particular error is that it usually is solved without replacing the fusing unit.
I usually recommend 9 to 6 inches of clearance around all sides of the machine!
Check your environment Make sure you have proper ventilation.
All company names/logos are properties of their owners.
If all the steps above have failed to solve your 55.
We have a program that will detect your hardware specifications and identify the correct driver for your needs, 8 fuser error is related to a high temperature reading in the fusing assembly, p9565, HP laserjet P9569.
So the fusing unit might normally run at around 855 decrees where as on heavy cardstock it could run at around 875 decrees.
Below is a link to the instructions on how to remove the fusing assembly and below that is a link to purchase a new fuser or PM kit for your machine. Since the fusing assembly is already overheating turning it back on right away can cause it to heat up more and permanently damage the unit. In this article I d like to talk about possible situations that can cause the issue and how to go about solving it. Media Running large print jobs with heavy cardstock can cause overheat issues. 8 fuser error then it s time to replace the fusing assembly.